+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Lca- which to use for bit more track
Posted on: 2012/4/2 4:33
Well I have unknown lcas with my car, but they are either stanza or sunny for the stanza/200 b combos I have used.
Are there any other lcas I can use from factory that use the stanza ball joints? Only things in front end that haven't been replaced are draglink, idler arm and lca bushes over the years. I'm about to do all 3 hoping to permanently eliminate a stupid wobble I have always had (not as bad since upgrading tie rods and ball joints) than it used to be. Car pulls left slightly too so thought if I could source lcas all in the one hit  
#2
Re: Lca- which to use for bit more track
supafatto
Posted on: 2012/4/2 4:58
Maddat! :) late ute and stanza ball joints are differant to mik! Stanza all the way! If u want more go adjustable ones
Product No - LCA1200
#3
Re: Lca- which to use for bit more track
Posted on: 2012/4/2 5:31
No they bolt up to lca the same it's just their angle and neg camber that differs
#4
Re: Lca- which to use for bit more track
supafatto
Posted on: 2012/4/2 5:54
They do bolt up the same but measure from center of ball joint to blots is different! Plus kpi is a slight grater
#5
Re: Lca- which to use for bit more track
supafatto
Posted on: 2012/4/2 5:55
Redrill xmember! One setup for track one for street 20mm offset :)
#6
Re: Lca- which to use for bit more track
levey
Posted on: 2012/4/2 11:59
If you increase the offset by 20mm won't you need adjustable caster rods? Or is there enough adjustment in the originals?
Cheers.
#7
Re: Lca- which to use for bit more track
supafatto
Posted on: 2012/4/2 12:11
He has adjustable castors
#8
Re: Lca- which to use for bit more track
1200rallycar
Posted on: 2012/4/2 12:18
why do you want more track? tyres will start hitting wheel wells and front of guards too?
you have adjustable tops yeah? get 1 degree ned and as much castor as possible? had a re-drilled x-member about 8 years ago, was drilled 10mm out and used 120y castors no prob
#9
Re: Lca- which to use for bit more track
levey
Posted on: 2012/4/2 12:24
Mik where did you get your adj casters from and how much? (did they cost).
#10
Re: Lca- which to use for bit more track
Posted on: 2012/4/2 12:51
Ummmm didnt cost anything... Just more thread on
Stock ones
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
