Hi,
Im after a camshaft in good condition for a later model manual datsun 1200 ute as im getting a cam custom made for my ute and i need to send the company a stock cam so they can regrind it.Let me know what you have thanks..

hi mate i dont have any stock ones but i do have a couple already ground, first is a early model A12 Wade 240 cam, second is an A15 Wade 140 cam.
let me know if you're interested.
Otherwise get onto Bige in Sydney.

heyy mate I have the following engine mods- 2 inch exhaust, extractors, Webber 32/36 carby, electronic dizzy, new coil, new leads..im after a cam that will work well with them mods I don't want anything extreme just after some more power low to mid range and a bit of a rough idle I want to keep the original cam as I will one day return the datto to stock..would any of them 2 cams suit my 1200 Ute its an 85 model..

Thanks Andrew

pm sent andrew,

Bige is your man to talk to. The early model cam wont fit a late model block ad dizzy gear is wrong.
The wade 140 is more of a racing cam and will fit your engine however is probably much to lumpy for what you're after.
Sorry but these cams probably dont quite swing your way haha.
GL tho!

thanks eddy,ive tried to help,but no replys,can't do no more,cheers

give it time, he'll get to you!

Sorry only check the site once a day thanks for all your help and information Bige PM sent..