+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Help identifying unknown from strut part #
Murvz
Posted on: 2015/4/22 6:36
I've been trying to identify the struts fitted to my 1200 ute. It appears it's had a bit of front end work done in a past life. I searched the part number stamped on them but havnt had any success. The number is nissan 54303v9302. I'd be stoked if anyone could help!
 
#2
Re: Help identifying unknown from strut part #
ddgonzal
Posted on: 2015/4/22 7:32
Nissan 910 Bluebird
#3
Re: Help identifying unknown from strut part #
Murvz
Posted on: 2015/4/22 7:51
True.. I wasn't expecting that! do you know if that is a common swap? I've been looking at picking set of shortened 200b struts. Probably going to be a full front end change if I go that way nowQuote:
#4
Re: Help identifying unknown from strut part #
ddgonzal
Posted on: 2015/4/22 9:33
Yes, 910 strut is every bit as good as 810 (200B) strut. See Strut Swaps section 910.
Except 910 has 5-lug rotors as far as I know even with the small engines so they are usually swapped out.
#5
Re: Help identifying unknown from strut part #
Murvz
Posted on: 2015/4/22 12:34
The hubs are standard 4 stud pattern. So at least that part has been done. I had a read of the write up in tech wiki, not a lot of info there on the strut itself. Eg.Shortening the strut, what gas inserts and springs to use. I'll keep digging around see what I can find! Cheers for the insight
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
