+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
problems fitting 120y discs to 1200 ute
Beautute
Posted on: 2015/5/11 10:28
Hi all, just finished fitting 120y struts with gas inserts and discs to my ute. The problem is that the wheels now have a lot of camber, the top of the wheel is about 20 -30mm further out than the bottom. I fitted lower control arms and cross member from a 78 ute. The left hand side seems worse than the right. Does anyone have any ideas of what I have done wrong. Thanks.
  
#2
Re: problems fitting 120y discs to 1200 ute
ddgonzal
Posted on: 2015/5/11 12:25
Possible causes include
* LCA are modified. They are normally same length as early ute LCA * Struts are not 120Y * spindles or strut housings are bent * You haven't rolled the ute back and forth after changing the suspension
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
