+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
63A 5-Speed Mated To A12
OGREInc
Posted on: 2016/12/26 1:24
I'm perusing installing a 63A 5-speed onto an A12 engine.
The Tech Wiki, while having a ton of useful swap data, does not seem to address whether the engine plate (sandwiched between the engine & trans on some engine/trans combos)is used in this particular instance. My 63A has the stock A14 throw-out bearing lever, bearing collar and throw-out bearing. My A12 has the stock flywheel. Any thoughts would be appreciated!  
#2
Re: 63A 5-Speed Mated To A12
ddgonzal
Posted on: 2016/12/26 3:52
It's designed to fit an A14, with the thick A14 flywheel. Since the A12 flywheel is thin, it will fit different (the throwout bearing adjustment)
#3
Re: 63A 5-Speed Mated To A12
AFRacer
Posted on: 2016/12/26 4:57
Should use the A12 flywheel without any sandwich plate with that trans then, right?
#4
Re: 63A 5-Speed Mated To A12
ddgonzal
Posted on: 2016/12/26 5:57
That's my best guess
63A normally uses Engine Plate + thick flywheel * 30411-H5001 PLATE-ENGINE REAR B210 A14 USA 0974- No Plate + thin flywheel I think will be equivalent
#5
Re: 63A 5-Speed Mated To A12
OGREInc
Posted on: 2016/12/27 1:51
Thanks gentlemen! When this comes together, I will post results for the Tech Wiki to update.
#6
Re: 63A 5-Speed Mated To A12
Rallytwit
Posted on: 2016/12/27 22:55
Stan if need an A14/15 flywheel I have a 14lb one.
Tom
#7
Re: 63A 5-Speed Mated To A12
JDWhite
Posted on: 2016/12/28 11:15
Can you not just use the longer throwout bearing carrier?
JD
#8
Re: 63A 5-Speed Mated To A12
ddgonzal
Posted on: 2016/12/30 6:08
Yes, a longer release bearing carrier could be found and installed together with an engine plate
The carrier he's got now (stock B210/63A carrier) I think is the best one
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
