+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#6
Re: steel rods
datto_dave
Posted on: 2004/9/9 8:07
they are cast rods as standard. i think i'll go with the standard rods and a good set of pistons and see wat happens THANX
DAVE  
#5
Re: steel rods
nzdatman
Posted on: 2004/9/9 7:54
I would be surprised if the stock L18 rods aren't up to the task. L-series are pretty tough motors. Aren't the stock rods steel anyway?
#4
Re: steel rods
tsillay
Posted on: 2004/9/9 2:38
Hey from memory, the L series rod in the competition manual is actually an FJ20 rod...
I doubt it'd be possible to break an L18 bottom end using FJ rods! (the heads might fall off the valves however....)
#3
Re: steel rods
datto_dave
Posted on: 2004/9/9 2:32
probably no more than 1 bar or so. the turbo i have is rather large so i'm going to have to turn the engine quite hard what sort of revs are they capable of as i havn't had a great deal of experience with l series thanx
DAVE
#2
Re: steel rods
L18_B110
Posted on: 2004/9/8 2:42
L series bottom ends are reknowned for their strength. just prep the factory rods properly and they will cop alot of punishment. How crazy are you intending to go with boost?
#1
steel rods
datto_dave
Posted on: 2004/9/8 1:22
hey all does anybody know a place where i can get steel rods for my turbo l18? or do ca18det rods fit thanx
DAVE
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
