+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#6
Re: pulling rear axle shaft
normo
Posted on: 2005/4/27 10:57
The heavier the chain the better. It works great. I had an axle twist inside the diff and the ionly way to straighten it and have it come out was a bunch of big fat mates and one mother of a chain. Fixed the car drove down the street and the U bolts were loose from all of the "chaining"
 
#5
Re: pulling rear axle shaft
converted
Posted on: 2005/4/27 10:55
thats a good one im gonna use that for the left hand side
#4
Re: pulling rear axle shaft
dazzasute
Posted on: 2005/4/27 10:25
get a length of chain about a meter long.
put each end onto a stud put wheel nuts onto those studs, so the chain can't come off wack the loop of chain with a length of steel pipe...
#3
Re: pulling rear axle shaft
converted
Posted on: 2005/4/27 8:38
I have a 13" wheel I use...but there is one that still wont come out...Im afraid it will have to be a slide hammer job.
#2
Re: pulling rear axle shaft
Cable_Tie
Posted on: 2005/4/26 23:23
Turn the drum into a slide hammer.
Put the drum on backwards. Do the wheelnuts up until they are "full" Slide the drum out quickly. . .
#1
pulling rear axle shaft
DatsunSSS
Posted on: 2005/4/26 20:55
How can i pull the rear axle shaft without a sliding hammer?
any ideas? 
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
