+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#4
Re: Strange Weber Idling Pattern
B210sleeper
Posted on: 2005/9/15 6:51
it's probably not the idle air correctors, if it were those it wouldn't vary.
First use a can of carb cleaner and spray around the outside of the carb and see if the idle changes, that will tell you if you have a vacuum leak ( most likley )  
#3
Re: Strange Weber Idling Pattern
Frodaddy
Posted on: 2005/9/15 5:38
Pretty sure the shaft had no play when I put it on. Will check again though. After doing some reading it might be the Idle Air Correctors which i did not know about.
#2
Re: Strange Weber Idling Pattern
Cable_Tie
Posted on: 2005/9/15 2:16
Primary throttle shaft. On the accelerator cable end, can you move it up and down?
This creates an airleak. Could also be a sticky float/needle and seat. Could be something else. . .
#1
Strange Weber Idling Pattern
Frodaddy
Posted on: 2005/9/15 1:25
I am in the process of trying to get another old Weber 32/36 running on the A12 and have come across an interesting symptom I cannot solve. When idling the car idles anywhere from 500-1500 then 1000-2000 then 200-1200 in a repetitive circuit style fashion. What could be causing this and why will it not idle constant?
Thanks Brock
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
