Qik1000
As far as i know the moulds are for standard gaurds but i have not yet seen them
I would think to have flared gaurds the moulds would have to be modified
My race coupe has about 1.5" flares made by
re shapping the steel gaurds (no added steel)
I,m still trying to make contact with the moulds and fibreglasser . I work long hours and am stuffed when i get home
Please bear with me as i also need the gaurds for my RAT UTE
I will also see if the glass bonnet mould is stiil in production
Cheers Mark

Hi Mopar. I'd be very interested in both front guards and maybe a bonnet. Is it possible to have the guards made with a small flare job? I'm only talking about 1 to 2" bigger than a standard guard.
Daniel.

if anyone makes the fibreglass gaurds pm me

If you carn't find the moulds i have two old panels that might help abit.
I'll also be first in line for a bonnet.
Ryan

Good to see there is interest in the 1000 gaurds
I will try and trace the moulds
I know a guy to do the glass work
He made a mould from a bonnet that i supplied about 8 years ago
i will contact him to see if he also still has the bonnet mould
Cheers Mark

When you get your up and running let me know.
I'll definatly take a set.
So i email this guy fmvince@dcsi.net.au to get flares for my 1000?

Cheers
Ryan

Hey thanks dattoman I'll contact that guy. Fiberglass fenders would be awesome.

I was going to make some molds to do fibreglass ones
Still might yet
I have to do bonnets as I like mine with the scoop.

But as an interim till I get mine up and running email this guy fmvince@dcsi.net.au
He does them for $230 each
He also does std bonnets , flares and other stuff

Well, there may be the future in fiberglass fenders.

I think that fiberglass fenders are going to be the way of the future for our 1000's. I know of only one new guard, & it's not available.
At least the fibreglass ones don't rust.