Sweet!
I've taken the day off to go crawl in the mud and dog doo at the wreckers.
thanks for the tool kit advice!

Vice grips too - sometimes those brake lines don't want to come off! Vice grips are great!

take a 17mm spanner
a wratchet with a 17mm socket
a hammer
a pair of cutting pliers
some multi grips
maybe a bar to lever stuff
and another hammer(bigger than the first one just incase you get stuck)

i like your style.
i'll take lots of general cutting.gripping.ripping and banging tools.and some inox...and forget the pipe spanner

A pipe spanner [we call 'em flare nut spanners,... same thing] is like a ring spanner with a gap around the perimiter so you can put it over ther brake pipe & onto the hex of the flare nut. They are usually made extra thick around the ring to resist flexing when you put some oomph into them.

dont worry about the pipe spanner, just cut the bastards and buy new ones

Cool,,,,,,
Err whats a pipe spanner?

a good quality pipe spanner is a must to suit the brake lones is a must, I meant to type lines and if you rough kunts have a better way, good luck
ade

you'll also need pliers to get the split pin out of the tie rod nut.

also 2 hammers is useful when splitting ball joints (if you are planning to do this)

yes ill take the control arm too.
Just a 17mm spanner.
sounds great.
Thanks Piggy
I'm putting them into a 120y
So i guess i'll have to get the stanza wheels as well eh?
( So the brake assembly fits inside)