+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#13
Re: nissan vanette diff help
dattodevil
Posted on: 2007/3/24 5:27
Well I know for sure the earlier C20 vanette is 100mm wider (total). If that helps. If you are fitting to a 1200 then you just need to move the platforms in 25mm and decrease the spring platform width by 10 mm, from 60mm to 50mm. you also need to move the brake pipe union mount from right to left. For a 120Y I am unsure.
 
#11
Re: nissan vanette diff help
Cameron_Datto
Posted on: 2007/3/23 6:58
so does that mean a stanza diff is too wide for a 1200? its to wide with out flares .. but works out ok with flares at the rear 
#10
Re: nissan vanette diff help
datgirl1200
Posted on: 2007/3/23 5:47
Quote:
so does that mean a stanza diff is too wide for a 1200?
#9
Re: nissan vanette diff help
Cameron_Datto
Posted on: 2007/3/23 4:39
They are around 1416mm with discs fitted .or 1400mm axle to axle face . for a C120 vanette .. but they have the smaller axles ,
a stanza diff is the same width The Std 1200 diff is 1300mm from axle to axle face , so its a 100mm wider in total width
#8
Re: nissan vanette diff help
A14force
Posted on: 2007/3/23 2:12
I think it's about 60mm wider per side.
#7
Re: nissan vanette diff help
sidedraught
Posted on: 2007/3/22 17:05
There is member on here with a 120y wagon rally car that has a Vanette diff, I think it sticks out a bit wider than the original but as its a race car its not an issue.
#6
Re: nissan vanette diff help
DatsunSSS
Posted on: 2007/3/22 15:02
thanks for your help.
Can anyone tell me if this diff fits the datsun 12OY?
#5
Re: nissan vanette diff help
LittleFireyOne
Posted on: 2007/3/22 3:46
I've got the measurements of my h190 in my pictures. Note that I drew the diff myself cos the camera was broken at the time
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
