+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#11
Re: what vannette parts can be salvaged?
frankthedolphintrainer
Posted on: 2007/7/1 12:32
yeah cant say ive had much experience with diffs dont really know much about them, might look into it and do some ressearch
 
#10
Re: what vannette parts can be salvaged?
sidedraught
Posted on: 2007/7/1 11:38
Pull your axles out a couple of inches and the diff centre will be easy to swap, but with your turbo motor you wont need a ratio that low as you will have torque to burn anyway.
#9
Re: what vannette parts can be salvaged?
frankthedolphintrainer
Posted on: 2007/7/1 11:06
would it take much to switch the diff centre cos the one on my ute is a little worn
#8
Re: what vannette parts can be salvaged?
1200rallycar
Posted on: 2007/7/1 11:03
diff should be h165 with ratio of 4.9:1 (housing too wide by 90mm but centre is good)
awesome acceleration, top speed around 160 with an overdrive 5 speed master cylinder is like 15/16ths (big mother) as well for big brake upgrades gearbox is only good for some parts
#7
Re: what vannette parts can be salvaged?
frankthedolphintrainer
Posted on: 2007/7/1 10:33
no i didnt actually
#6
Re: what vannette parts can be salvaged?
LittleFireyOne
Posted on: 2007/7/1 10:27
notice that it's a reversed one though?
#5
Re: what vannette parts can be salvaged?
frankthedolphintrainer
Posted on: 2007/7/1 9:57
yeah i noticed the front suspension was like the 1000s and its got discs, and as for the booster its way to big for the 1200 damn.
#4
Re: what vannette parts can be salvaged?
sidedraught
Posted on: 2007/7/1 9:50
They have a transverse front leaf like a 1000 and I have heard of suspension bits and brakes being modified and swapped over.
#3
Re: what vannette parts can be salvaged?
dog160
Posted on: 2007/7/1 9:42
Radiator is normally three row if it is fitted with air. Easy upgrade.
#2
Re: what vannette parts can be salvaged?
LittleFireyOne
Posted on: 2007/7/1 9:39
besides the obvious spare engine you ahve now you can grab the gearbox, rear axle assembly, brake master, front hubs disks and brakes (got a suspision here hey may have some bolt in qualities with other struts), front seat since it's nice and simple for any projects.
I can't think of anything more atm but I'm sure there was more I could have grabbed off mine when I had it edit: probly the door handles too but I'm unsure if there were any differences in them compare to other cars.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
