+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#13
Re: Does anyone have a B310 auto tailshaft they can measure?
WhiteSedan
Posted on: 2007/9/27 11:22
Ahh no stress, I'll be doing some measuring over the weekend hopefully and get this worked out. 130mm shorter if thats the case for the auto is going to be absolutely perfect.
 
#12
Re: Does anyone have a B310 auto tailshaft they can measure?
PIGDOG
Posted on: 2007/9/27 11:16
didnt get a chance to make those measurements today...was busy showing someone that a CA isnt needed in a 1200
#11
Re: Does anyone have a B310 auto tailshaft they can measure?
WhiteSedan
Posted on: 2007/9/27 9:52
Im using an L-series with a H165 diff. The SR20 box should be the same as the L-series box anyway.
I see you have a sunny, its not auto is it?
#10
Re: Does anyone have a B310 auto tailshaft they can measure?
datsunsunny
Posted on: 2007/9/27 9:40
but in the case of having the r31 diff and the sr20det. don't you think that u need to use an r31 tail shaft in the rearpart of the shaft and an s14 front part. or it is not possible to do
#9
Re: Does anyone have a B310 auto tailshaft they can measure?
WhiteSedan
Posted on: 2007/9/27 9:35
Stanza factory manual reports the same differences, uni-uni A/T is 1055mm, uni-uni M/T is 1185. Still dont know the difference in the overall length.
Ive got a manual stanza shaft (dogleg to H165) that I will measure up properly ie. end yoke to centre uni and flange end to centre uni.
#8
Re: Does anyone have a B310 auto tailshaft they can measure?
WhiteSedan
Posted on: 2007/9/26 13:12
Im not so sure, maybe the sunnys had longer auto boxes.
My factory manual definitely says the auto is about 130mm shorter, it doesnt specify where the measurement is from but it would be uni-uni, where as the B210 tailshaft only has one measurement and the yoke length changes. 
#7
Re: Does anyone have a B310 auto tailshaft they can measure?
PIGDOG
Posted on: 2007/9/26 12:47
h150 equipt 120y auto tailshaft will be the same length
#6
Re: Does anyone have a B310 auto tailshaft they can measure?
BAD310
Posted on: 2007/9/26 11:40
I have only ever used manual ones, the only other one I have is in the car at the moment (SR20 five speed to R31 diff) = much much shorter
#5
Re: Does anyone have a B310 auto tailshaft they can measure?
WhiteSedan
Posted on: 2007/9/26 11:31
Fan-bloody-tastic!!
That means Im correct that the auto shaft must be shorter, the measurement given in the factory manual is only centre of uni to uni and that is 1177mm for manual and 1045 for auto. Hopefully the overall length is shorter, have you ever had to use a auto shaft or done a manual conversion and noticed any difference?
#4
Re: Does anyone have a B310 auto tailshaft they can measure?
BAD310
Posted on: 2007/9/26 11:28
Ok, lets see if this makes sence. I'm working front to back of a manual '81 B310 4 speed/H150.
From tip to part that bumps agains gearbox: 85mm From that point to centre of uni: 34mm (from tip to centre of uni: 119mm) centre of uni to centre of uni: 1175mm centre of uni to flange mating face (diff end): 33mm from tip to tip: 1327mm Hope that helps.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
