ive got the old skool saas fixed back buckets in my car, all i did was get 2 bits of flat plate and drill 2 holes for the original rails and then 2 holes for the plate to bolt to the seats

pretty easy to do and plenty strong enough

Just slightly on topic.

Has anyone considered using RS2000 escort seats in a 1k?

I did a quick measure last week as a neighbour has some to dispose of, and they look like a damn close fit.

I BRought OBX seats, bucket style and they bolted straight onto orignal rails, cost me 500 with shipping for a pair

I got some piranha seats on ebay.
Just had to get a couple bits of 50mm flat and drilled some holes and they fitted on the original rails sweet as.
Cheers
Bob

Hi mate
As Burke_a_lot has suggested do a search as this topic has been covered several times.

There are 2 types that I have used that bolt up to the factory rails (with spacers) and physically fit into a ute.

Email me if you would like photos.
Matty

<----------- Search! racing seats!

Has anyone here got racing seats in there ute? i bought some sass seats but it seems like alot of cutting and welding to get them in on the original rails. How have yous done it?