wiki not always right, its just a guide.

if u put e15 guts in a12 dizzy u need a biger cap
have done had to make a rotor buton to fit a12 cap

Thanks Tommo. That's Exactlly what I wanted hear.

Has any one noticed that the wiki says the rotor sits higher meaning a different cap/rotor is needed?

u use stock replacement dizzy parts e15
only bottom half moded
std cap and rotor button
tommo

Factory parts. Basically I'm askin if I was to get a cap and rotor to suit a n12 pulsar, would they fit the dizzy that is adapted to suit an a series?

What do you mean with stock parts?

Apparently according to the wiki the cap and rotor need to be taller than stock parts.

Has any one used stock caps and rotors? That would be allot easier.

I just had a look for you on my E15 Dizzy, mine only state the Nissan Badge on them with no part numbers.

Quick search on the net revealed the following:
http://www.bosch.com.au/content/langu ... s/Ignitioncatalogue07.pdf - Page 35
Cap - GH506
Rotor - GH600

The best advice will be to phone Nissan or a parts shop and just confirm that part numbers.

Hey peoples.

Have people with this distributor had any trouble finding rotors and/or caps. In the wiki it says the part numbers are CAP-BOSCH GM554 ROTOR-BOSCH GM555. Is this right? The writer seems to be unsure.

Cheers