+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#7
Re: Problem Removing Filler Bolt On Gearbox
WhiteSedan
Posted on: 2009/9/15 7:20
Yeah I filled the 5th gear and reverse switches on the racecar with kneed-it.
Those bolts are a bitch to get undone, plumber stilsons are good.  
#6
Re: Problem Removing Filler Bolt On Gearbox
bailz
Posted on: 2009/9/15 5:31
a bit of heat and some crc usually does it
#5
Re: Problem Removing Filler Bolt On Gearbox
bailz
Posted on: 2009/9/15 5:31
use a bigger spanner :)
#4
Re: Problem Removing Filler Bolt On Gearbox
DatJaffa
Posted on: 2009/9/15 4:56
hit it with some silicone spray and leave for a while then try people dont get that these are tapered nuts so dont need to be tightned up so much ive seen housings cracked by overthightning these fill plugs!!!
There just a fill plug not holding the gear box together!!
#3
Re: Problem Removing Filler Bolt On Gearbox
short-coupe
Posted on: 2009/9/15 4:47
we had to weld a 1" bolt onto the side of it and while it was hot, 2 of us cracked it with a long ring spanner, the box was out of the car
#2
Re: Problem Removing Filler Bolt On Gearbox
1000Coupe
Posted on: 2009/9/15 3:19
soak in penetrene o/nite, extension bar, last resort heat bolt with oxy if u have one...
#1
Problem Removing Filler Bolt On Gearbox
DatsAndy
Posted on: 2009/9/15 3:16
Have Tried Removing The Square headed bolt to fill stumpy box with oil and it wont budge, any tips. It has series 2 TRX bluebird bellhousing. Anyone ever filled the box where the reverse light switch bolts in
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
