a15 built and in the ute. block decked to mazda e5 piston, 78,35mm bore. h75 ported head, 2mm decked, twin hitachi su carbs from L16 sss, 290 degree camshaft, knife edge crankshaft, lightened flywheel. 60a 4 speed gearbox for now. balanced bottom end, a14 outer valve springs, bmw inner valve springs, 4-1 branch & 57mm free flow zorst

Attach file:

---

  a15 block.jpg (31.29 KB)


  a15 block 2.jpg (32.49 KB)


  engine out.jpg (46.58 KB)


  h75.jpg (56.64 KB)

hi everyone, got all the parts back of the a15. it's going in this weekend. will get some pics up as i build. it's an a15 fitted with mazda e5 60 thou pistons, block decked for pistons, knife edge crank, all balanced, light weight flywheel, tr68 290 degree camshaft with 11.5 mm lift, h75 head with 2mm shaved off, port matched to su manifold, flowed head, new valves, double valve springs etc, electronic dizzy & coil, branch and 57mm free flow. thanks for everyones input on building the engine. anyone know what kind of power figure this will make?

Attach file:

---

  flywheel.jpg (13.78 KB)

i bought the lip over the counter for R250 zar

On i mean the front lip... sorry!

thats an original bumper from the newer ute's here in south africa. from the 85 model onwards had those bumpers

Looks the good mate! Well done.
Love the front bar! Did you get it made yourself?
Keen for one myself

pics of my knife edge a15 that i got today

Attach file:

---

  Untitled.jpg (107.67 KB)

some pics with the fibreglass kit and bumper

Attach file:

---

  015b.gif (98.17 KB)


  054b.gif (110.80 KB)


  053b.gif (102.17 KB)


  IMAG0033b.gif (117.34 KB)

Great looking ute mate, congrats

hey guys, been a while since i posted here. finally got my a15 back from engineering. it's been boared out 60 thou with mazda e15 pistons, block was decked and the crank is now in for knive edging, then going for balancing. still trying to get hold of a gx head or h89 which will be fit with big valves, flowed etc. also picking up a set of 43mm x4 itb's that will go on with wasted spark setup. will post up some pics of the block and pistons asap. also got a bumper and new fibreglass spoiler fitted