+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#13
Re: rear sway bar on a 120Y (B210)
jaimecidpedro
Posted on: 2001/12/26 5:13
HY. Is the bar complete with links and brackets (rear bar ).Let me know ,i will find out about shipment if that is ever a posible ,by
boat it is cheap. Thanks.  
#12
Re: rear sway bar on a 120Y (B210)
andrewjdonoghue
Posted on: 2001/12/26 4:47
The guy in the front flat has one I could probably take for free, but I think the cost of posting it to you
might be excessive.
#11
Re: rear sway bar on a 120Y (B210)
jaimecidpedro
Posted on: 2001/11/28 3:49
Thanks Eddie,I just checked out your article and I will study it in detail,thanks for the tech data,I am glad to know I will get more
knowledge on the subject. Thanks again. Jaime.
#10
Re: rear sway bar on a 120Y (B210)
ratdat_uk
Posted on: 2001/11/27 8:21
Jaime,
Instead of scanning a few pics I have scanned a whole section on live rear axles from a book on chassis design and uploaded it to my webspace so you can read it. You can find it here... http://www.ratdat.com/chassis/index.htm Hope this helps... Eddie
#9
Re: rear sway bar on a 120Y (B210)
jaimecidpedro
Posted on: 2001/11/27 6:25
Teretonga. I do not have 300HP as of yet,although the time will come when I will add a substantial amount into my Datsun.I am finding out,and as soon as I install the konis I
will post the results of the test drive. Thanks and have fun.
#8
Re: rear sway bar on a 120Y (B210)
jaimecidpedro
Posted on: 2001/11/27 6:21
Eddie. I would appreciate that if you have the time.I am devoted into making my B210 a fun and efficient
Datsun. Thanks and waiting. Jaime.
#7
Re: rear sway bar on a 120Y (B210)
teretonga
Posted on: 2001/11/27 5:56
It's probably easier to make your own. All the A-frame or the Panhard will do is stop your rear end moving sideways under cornering forces. To be honest unless you are racing I would
stick with the flat springs and Koni's at the moment. You will be driving very hard to have problems with that set-up - and you can add the other bits on later if you need them. There is a guy here who does some racing in his B110 coupe - putting out around 300 hp - and I believe he has no rear locating bars and still kicks booty.
#6
Re: rear sway bar on a 120Y (B210)
ratdat_uk
Posted on: 2001/11/27 5:55
Hehehe... I know they were sold there but I doubt they were very popular
 A panhard rod is relatively easy to make but a watts linkage is much harder although it does the job better than a panhard rod. I can scan some diagrams of the various set-ups if you want. Eddie
#5
Re: rear sway bar on a 120Y (B210)
jaimecidpedro
Posted on: 2001/11/27 5:51
Finding a British Rover 3500(SD1)in the US is like finding a russian brabant in Bolivia,I do not expect that to happen,unfortunately.Anyways
I will ask around. Thanks.
#4
Re: rear sway bar on a 120Y (B210)
jaimecidpedro
Posted on: 2001/11/27 5:47
Hy and thanks for your comment on the koni's,it feels good to know i did a good move,and about the A frame,or panhard rod,do you know any sources for the part? I would like to get
one ,and to be honest,I do not know how they look like. Thanks.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
