No, that is the only one on a stock 1200

the manual says it's the paper element type in the line from the tank.. i.e. this guy.. (see pic attached) which I've replaced.. is there another one?

Attach file:

---

  DSC02118.JPG (162.77 KB)

Get a hold of an engine or repair manual and go from there or pick up a spanner and have a look, you sound fairly cluey get some practical into the mix and you will find the solution to the problem will come quicker.

But is the filer inside the pump or in the carby? I have an inline filter that i did replace.

Have you actually tested the output of the pump?

You're going to be really annoyed with yourself if you buy a new pump only to find that a partially blocked filter was the cause of your problems all along.

Replace the filter first [cheap & easy] then see if the problem remains.

Where it looks the same or not doesn't matter, see if the arm is the same and the dimensions are correct.

Don't forget that there is a phenolic spacer too.

hahah that's the one I bought...
I don't know if it's early or late.. they say 1970-1973
but the end of it doesn't look like an early one..

i asked at auto one and they said the only part numbers they had were for a fuel pump spanning 1970-1980..

which could be either any

Just about anywhere: supercheap, repco, Nissan dealer, ebay.

Like this one from ebay. Although you can't tell from the photo if it is for early A12 or late A12.

Attach file:

---

  fuel_pump.jpg (28.47 KB)

from the forum wiki

Re: A-series Fuel Pump Comparo
Top left: late-A12 original style,5 bolt top
Top right: triangular top mid-1970s
Bottom left: early A12 (short arm), 1-bolt top
Bottom right: non-rebuildable circa 1980


and the one I bought:
[img]http://i.ebayimg.com/24/!B-ld(2!!2k~$(KGrHqYOKioEzWlY7myDBM9EWvBYHg~~_12.JPG[/img]

mine doesn't look much like the early model pump yet the ebay auction said 1970-1973

just wondering where in syd would i find a late model pump?
Goss make a pump but for some reason it spans all the year ranges so im thinking that can't be correct!!

anywhere you can think of?


I contacted auto 1 and they said the only pump they have is a fuelmieser that suits 1971-1980?? so how would that suit the early and late model engines?? I'm most confused!

Cheers,
Tom