|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#4
Re: Brake problem 1200 ute.
ssskiwi
Posted on: 2011/10/25 11:35
back the h-brake right off and adjust the shoes. Then adjust the h-brake again. Then bleed the brakes thoroughly, that should sort it..
#3
Re: Brake problem 1200 ute.
levey
Posted on: 2011/10/25 11:12
Yep Air in the system, a fluid leak or it could be siezed rear brake pad adjuster/s
EDIT: assuming you have adjusted the rear brakes.
#2
Re: Brake problem 1200 ute.
dattoman_1000
Posted on: 2011/10/25 11:11
Air in the system or brake adjustment
2 of the 15 likely causes of the symptoms you describe
#1
Brake problem 1200 ute.
shane0o7
Posted on: 2011/10/25 10:52
So the brakes have been progressively getting worse and I had noticed the fluid had been getting low. The master cylinder was on it's way out so I thought this was the problem so I replaced it. Installed it on the weekend and bled the system and the rear slave cylinder started leaking. So today I buy another. They only came as a pair. So tonight I put the new one in and proceed to bleed the system and get all the air out. Only to find that the peddle goes to the floor. If u pump it it gets hard and stays hard. But drive a bit and it goes to the floor again. What could this be?
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|