got some race springs in stock , to suit up to 0.550' valve lift

what can you tell me about valve springs mate?
i have a h89 head with a couple of sheared off valve guides so while that is at the machine shop gettin new guides i am chasing a set of double valve springs( if needed)

pm'd

bump.

engine bits; be a great xmas present from the wife.

i'll be at the dato day sunday (sydney) parts on display. cheers.

edit updated

phone number pm'd to the members that pm me. cheers

a10/a12/a14/a15 "rebuild kits" with a15 cast dish pistons, a14 hi comp,a12 flat top/rings/conrod,mains,cam bearings/gaskets/timing kit. can make up kit to suit your sizes you need. starting for $450.00.

can also do separate items. if required

also got a set of NEW ross forged a15 78mm flat top pistons with pins & clips &
valve reliefs (30mm c/h) & total seal race rings.custom made.



also a s/hand set of ross forged flat tops(with valve reliefs)77.5mm a15 on rods(polished & shotpeened) & rings(used totalseal, be ok for re-use)(slight crown damage & skirt,but still can be used no problems.


also a15 NEW 77.5mm flat tops (no reliefs) 29mm c/h cast pistons/rings/buttons, 18mm bushed floating rods to suit.


also got engine parts; heads/cams/cranks/ sumps/rockers .all other parts as well.

"i can also build for you or build yourself"

pm if interested. cheers

Attach file:

---

  engine kits a15.jpg (62.90 KB)