+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#4
Re: hilux diff to suit tubbed Datsun/ Mazda / rolla etc. out of WARZ ON
44lex
Posted on: 2011/11/2 6:45
SOLD SOLD SOLD
 
#3
Re: hilux diff to suit tubbed Datsun/ Mazda / rolla etc. out of WARZ ON
44lex
Posted on: 2011/11/1 10:03
Car has to be tubbed. I think standard 1200 diffs are 1300 long. If a ute is tubbed to the rails this setup will work with wheels that have big dish.
#2
Re: hilux diff to suit tubbed Datsun/ Mazda / rolla etc. out of WARZ ON
rugger
Posted on: 2011/11/1 9:43
So this will bolt straight into datsun 1200 ute? I assume it needs to tubbed to chassis rail?
#1
hilux diff to suit tubbed Datsun/ Mazda / rolla etc. out of WARZ ON
44lex
Posted on: 2011/11/1 7:14
For sale I have the hilux diff that was in my tubbed datsun 1200 ute. Could be used in any Datsun. Diff face to diff face measures 1080mm. I was still using a leaf spring setup. You could use a 4 link or ladder bar with this if u please. Has a full spool 4.8 centre. New bearings. Para chute bracket has been welded to the back of the housing. It has ford studs pattern 5x114.3 which at extra cost if need I could chage to standard Datsun. Has long 1/2 studds and convo pro or weld wheels nuts to suit. Brakes setup inr31 discs which I am looking to keep. Will leave brackets on there if needed. This has had big HP through it. Need to upgrade to 9 inch. No time wasters please.
$1500 without brakes. $1800 with brakes.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
