Rotors are 280x22mm.

Pm an offer if interested :)

Edit:
Also
All gearboxes are non-stumpy
200b discs and calipers added

Also interested in what the brakes are if they are 250mm ill be keen

what size rotors for 180sx and how much calipers and rotors

Pms replied,

*L18 added to list
*S13 gear added

ballpark on what you'd want for the cleveland?

Are all the 5 speeds stumpys? And the 4 speed?

Hi all,
Have not seen my car for the last 6 years so time to sell up and get rid of my Datsun collection.

A-series gear
*late a12 long motor. No idea on condition as it came spare with a car. Turns over, starter works. No manifolds or carbs.
*4 speed gearbox
*standard a12 intake manifold and carb
*2 x 32/36 weber carbs all unknown condition

L-series (4 cyl not 6 cyl)
*L20B. Runs, drove from Bendigo to Geelong, no smoke, fuel econ okay, overheated 3 times - not sure if radiator or engine/carb. Complete with manifolds/carb.
*Auto gearbox fully reconditioned (professionally) and never run, still oiled and sitting in wrap - offers $50 or more
*4 speed manual box
*3 x 5 speed gearbox. One is a dogleg - $100 each
*L18 efi manifold with injectors/rail, no loom or ecu. Offers $300+
*Cast iron turbo (exhaust) manifold. Stock from a Datsun forklift. *cracked* so needs to be re-welded
*L18 turbo motor. L16 block bored with L18 crank and rods, new L20b pistons with copper head gasket and fully rebuilt L20B head. Arp rod and main bolts. Should be ~ 8:1 CR.
*T25 off CA18det
*L20B radiator - no holes/damage
*200B diff - $50
*200B brake cyl and booster
*180b seats in good condition - cream coloured - front and back
*200b seats - poor condition
*L18 completely dismantled, block/breather
*Rusty L16 crank
*200b discs and calipers
CA18DET stuff
*S13 CA18Det fully rebuilt by Dalton Automotive in Geelong. New everything with arias forged pistons and lots of head work. Cost $5500 (can get a print out of receipt). Offers?
*Ca18Det 5 speed box $300
*S13 radiator - average condition

S13 stuff
*180SX discs and rotors
*S13 power steering rack
*S13 SR20de x-member (from 180SX type X)


That is all I can think of for now. Will add pics if wanted (just pm me).

Most items above have no price so send me an offer.

Postage okay or pick up from Meredith (between Ballarat and Geelong)
OR
I can drop off in Geelong/Ballarat for extra.

Also have a 351 cleavland although I doubt anyone here would have any use for it :)