will the manual box with tailshaft be the correct length for a 1200 ute do you know? if so how much do you want for motor/box/tailshaft/any other accessories required to get it running?

Sorry steering box stayed in the car as I needed it to be able to steer to get it down my driveway and onto the trailer.

I do have a bumper with the lights all still in it, ill have to check condition but from memory the lights arent too bad. I have a windscreen but it go cracked while in storage so isnt much good. and the chassis is longggg gone now so cant help with the rust repair sections.

G'day mate, you wouldn't happen to have a set of front bumper parking/indicators, a ceiling interior light and a front windscreen? I'm currently rebuilding a b210 4 door with the missus, we need quite a few parts but that's what I can remember off the top of my head. There is a bit of rust that I need to repair and would be great if I could get some cuts of the chassis if you're scrapping it.

Regards Kieran.

hello im looking for a 120y stearing box do you have one??

Still got some stuff-
Stock carby
32/36 weber (almost brand new)
4 doors
head lights
tail lights (surround is damaged)
wipers
radiator
start
alternator
intake manifold
exhaust manifold
auto box
dragway wheels

All I can think of off the top of my head.
Make offers, running out of room in the garage.

Photos-

Bonnet-






Tail Lights- (surround are broken)



Radiator-



Roof Guttering Chrome (some bends but should straighten out ok)



Seat Belts, Washer Bottle-



Head Lights- (Also have a spare grille can sell as whole or seperate)



Manual Box-





Rocker Cover-



Doors- (starting to rub them back and prime them)



Wiper Panel-



Wipers-



Manual Tail Shaft-



Dizzy-



Exhaust Manifold-



Intake Manifold-

BUMP-
Looks like Reco head and front bumper are sold (pending pick up today)
Doors might be gone, waiting to here back from the guy interested in them.

Still have-
32/36 weber carb
Running A12 Engine
Auto Gearbox
Manual Gearbox
Manual tail shaft
Front window
Rear Bumper
Heaps of engine bolt ons- alternator, starter, manifolds ect
13x6" Dragway 4 spoke wheels. Rears are a lot more negative offset then fronts, and all have some nice dish, not sure on offset as I havnt checked but will work it out when I clean them up. Great classic looking wheels and all have centercaps!
Heres some photos of them as they are now, I will clean them up before sale.










They're not perfect but they should come up quiet nice with a wet and dry and a good polish and buff.
Price is $350ono Will add photos after I clean them up and confirm offsets.


I also have another set of the same wheels in 13x7" in better condition (full chrome centres as well opposed to machine finished)No centre caps though.
Will let them go for $450ono as they are just collecting dust in my garage. Pics will come tonight. Going to go through the garage and shed now and photograph everything.

Bump- can get photos if people want them.

Okay so bought the car home last night and scrapped the shell at lunch time.
whats left-
4 door with chrome and glass (one rear is missing triangle glass)
Front windscreen
bumpers
all lights
horn

ALSO have a full set of dragway 4 spoke wheels with all centre caps! Ill check sizes and offsets when I clean them up. Nice classic looking wheels and rare to have all centre caps. Want $350 ono for these tyres have tread my are very old so I would not use them for anything other then burnouts haha

Looking at about $50 per door, $50 for bonnet, $40 Tail lights, $40 per bumper but make an offer. All panels are pretty straight, painted matte black very poorly but looks straight and I found no bog in any of the car so guessing the panels are the same.
If they dont sell quickly Ill strip them back, etch and surface prime and up the price.

probs other stuff ive forgotten that ill add with photos on Monday. The boot was stuffed as were the seats and most interior parts, didnt take the dash.

Didnt take any steering/brakes/diff/handbrake ect as I needed it rolling and steering to get it down my steep driveway..

I also have a complete A12 (running when removed) Auto box, manual box, tail shaft plus all the other stuff in the 1st post (NOTE IM USING THE MANUAL PEDAL BOX SO THE MANUAL BOX NO LONGER COMES WITH IT)

Will sell as a bulk lot for cheap as I dont have much room haha

Ill get photos on Monday as I work the weekend but if theres real interest and a buy wants them sooner I can get them tomorrow night or something. Just PM me with what you want and ill get some pics.

:)

Picking the car up tonight, so if you need rust repair sections let me know asap so I can cut them out before I scrap the shell. Will take photos of the rest of the car thats for sale after I pick it up.

Also I am negotiable on the other parts for sale. Surly someone needs a running A12 engine or gearbox? Upgrade to a Weber or bold a fresh recoed head on?