+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#11
Re: aftermarket sway bar link assembly too tall?
L18_B110
Posted on: 2013/10/24 4:33
options if you want it to be the exact same length - you could grind the poly bushes down a bit on a bench grinder, you could take a bit off the sleeve in the middle. If you put the new bushes on the orignal link pins, you'll probably need to grind them down a bit too - they look thicker.
Or you could just fit the new link pins. It is unlikely to cause any problems being slightly longer.  
#10
Re: aftermarket sway bar link assembly too tall?
datsunbeginner
Posted on: 2013/10/24 3:53
I think I know what you mean but not 100% sure. Whats your opinion on the new link bars, yay or nay? I could just use the bushings on the stock link bar too?
#9
Re: aftermarket sway bar link assembly too tall?
L18_B110
Posted on: 2013/10/24 2:22
the dip in the center goes down - if that makes sense...
#8
Re: aftermarket sway bar link assembly too tall?
datsunbeginner
Posted on: 2013/10/24 2:07
Quote:
sway bar bushings. make sure the bar is tight in the brackets. Replace the bushings as necessary. Also, make sure the side of the bar with factory white paint mark is installed on the left side of the vehicle Oops. I painted my sway bar and don't know which way to put it now?
#7
Re: aftermarket sway bar link assembly too tall?
datsunbeginner
Posted on: 2013/10/22 2:43
Next question - Which way is up on the sway bar?
#6
Re: aftermarket sway bar link assembly too tall?
datsunbeginner
Posted on: 2013/10/22 2:42
After further examination it is not the sleeve.
It appears the bushings are too big? Am I being too paranoid? Attach file:  bushings2.jpg (128.71 KB)
#5
Re: aftermarket sway bar link assembly too tall?
supafatto
Posted on: 2013/10/21 9:37
Yeah I did the same thing years back I cut the sleeve and was good
#4
Re: aftermarket sway bar link assembly too tall?
datsunbeginner
Posted on: 2013/10/21 2:14
I think the discrepancy is in the sleeve. I think you are right though Harry. If I cut down the sleeve to match the standard height it should be okay. Good thinking.
#3
Re: aftermarket sway bar link assembly too tall?
L18_B110
Posted on: 2013/10/21 2:09
easily fixed - cut down the sleeve to suit, and use a shorter bolt if neccesary.
#2
Re: aftermarket sway bar link assembly too tall?
datsunbeginner
Posted on: 2013/10/21 0:43
Pic
Attach file: $(KGrHqIOKjwE3QmcNN5QBN8H+iMjog~~_35.jpg (9.31 KB)
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
