+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#4
Re: Distributor wiggle in block.........tried 4 or 5 same thing
Rallytwit
Posted on: 2013/11/21 2:36
Yes I have seen foil used for a shim before and it does indeed work.
Tom  
#3
Re: Distributor wiggle in block.........tried 4 or 5 same thing
dennisg
Posted on: 2013/11/20 6:43
The movement that you noted would seem to be due to a slightly loose fit between the distributor body and the block.
You could use shimming to reduce that play. I have used aluminum foil for very thin shims and beer can metal for somewhat thicker ones. You can easily buy shim stock, I usually buy mine from model building shops.
#2
Re: Distributor wiggle in block.........tried 4 or 5 same thing
ddgonzal
Posted on: 2013/11/19 7:01
Yes, I've seen that before. If I recall it was when using a modified hold-down plate (timing plate). Didn't seem to bother the running of the engine.
#1
Distributor wiggle in block.........tried 4 or 5 same thing
Rallytwit
Posted on: 2013/11/19 5:36
I've noticed this before but with the distributor plate firmly bolted to the distributor and the block you can still wiggle the whole unit. This is not to be confused with worn shaft, you can grab the whole body and wiggle it. Has anyone else noticed this? I test fit several in both the A12 and the A15 block.
Tom
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
