I'm interested in a pulley

But it's a weird one
I want a V belt and a ribbed belt... and I see you do these
But I also want to add a crank angle sensor wheel to the back of it
Can this be done with the existing ones you do ?
And I want a spigot on the front to accept a toothed gear for running the dry sump pump.

So something like this crank wheel
And this spigot drive and spigot
Not specifically these units... just examples off the net

The pulley I would want a bit of weight in it like a proper harmonic damper

https://rossperformanceparts.com/produ ... -vk56-crank-trigger-disc/

https://rossperformanceparts.com/produ ... ptor-with-19t-htd-pulley/

I'm thinking of producing some more Gilmer drive kits Around the $200 mark, anyone want one?.
Also can make adaptor plates/brackets for AMR500/EATON R410 Superchargers.
Adelaide
Ph/txt 0416080462

Datsun A-series long water pump gilmer pulleys $65ea.
I can produce an adaptor to mount this onto short nose water pump,
call 0416080462 for details

Attach file:

---

  datwp.jpg (12.26 KB)

I have produced a few more gilmer pulley sets suit long water pump. Available next week

$220posted

phone 0416080462

yes, there will be a separate hub

Apart from the offset differences between the long and short nose water pumps the PCD of the 4 bolts that mount the pulley to the pump is different. On the short nose pump the PCD is larger. While I think of it the centre hub that the pulley locates on is also larger on the short nose pump.

There been a big demand for more gilmer sets, so I will design a water pump pulley that fits both long and short pumps.

Can anybody send me a short water pump pulley so I can get dimensions from it?, I will return to sender at my cost

What water pump is this suited for A15 i need to replace mine as the new pulley is to small to go over the waterpump i have got at the moment.. so do i get long nose short nose?
also my alternator doesnt suit also the shaft is to short
so who ever has put one of these kits on their A15 could you please tell me what parts are on your motor thanks

My new supercharger crank vpulley with 6rib flat should be available in a couple of weeks. In the mean time i have picked up a 120y to use for making parts for a-series engines.

What water pumps are more common short or long? or should i make parts/pulleys for both?

Supercharger pulleys for A-SERIES
Only 10pcs being produced, $140posted comes with steel crank hub, available soon

Attach file:

---

  scp01.jpg (8.20 KB)