+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#7
Re: forged pistons or standard
moridat
Posted on: 2014/9/9 9:18
this is why i am asking advice everyone has different experiences that i listed the mods i was thinking about all info helps also if you are using blowthrough system on the turbo does the box seal between the manifold and the carb .....thanks
 
#6
Re: forged pistons or standard
Matto1kUte
Posted on: 2014/9/8 6:49
Im looking at building a a12 turbo. I already have one atm but from what I have read is that the a12 is stronger and can handle higher boost than a a14/15. I dont know if its true but mine hasn't blown up. Also a12's are cheap and usually u dont have to change compression
#5
Re: forged pistons or standard
moridat
Posted on: 2014/9/7 9:25
thanks for all the help much appreciated
#4
Re: forged pistons or standard
moridat
Posted on: 2014/9/5 2:59
sorry about that..a1400 bored to 1st oversize, h89 head double valve springs may be larger valves.. engine balanced, cam not sure what duration, car for street use with a bit of squirt t25 turbo charger. blow through system either webber 32/36 or holly 350-500 with one venturi blocked of and converted to run top hat on blow through system hope this makes sence as it is in the devolpment stages that is why am asking for advice.
thanks....moridat
#3
Re: forged pistons or standard
nickmitty
Posted on: 2014/9/4 9:19
You have given no indication of what Use your looking for or Engine size, Turbo size etc, http://datsun1200.com/modules/mediawiki/?title=Turbo
#2
Re: forged pistons or standard
benny
Posted on: 2014/9/4 9:09
std pistons are up to the job. quite a few member have achieved very reliable boosted A-series with moderate to extreme power.
Sikynes IPRA 1200 Coupe Dyno session Quote:
Quote:
#1
forged pistons or standard
moridat
Posted on: 2014/9/4 8:26
hi I have been told that if I am going to turbo an ;A; series engine that I will have to use forged pistons other wise I will just blow the tops of them. that is the standard pistons there must be people out there who can point me in the right direction I only work on other peoples experiences as I am not on an unlimited budget so every saving helps thank you people
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
