+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#2
Re: brakes not working
ddgonzal
Posted on: 2015/4/24 18:09
Ebrahim, I'm not sure what is the symptom
* "If I bleed the back brakes for on my master cylinder with my brake pedal pressed in, the pedal goes down to the floor board" * "if I try bleeding the back brakes from the master cylinder, then it stays the same" Can you give more details? It is common for 1) a new master cylinder to be defective and 2) for the master cylinder pushrod to need adjustment  
#1
brakes not working
ddgonzal
Posted on: 2015/4/24 18:02
A club member asked:
Quote: Hi Guys I need help with my datsun 1200 original stock standard brakes. After installing a new master cylinder and new brake pads... For some reason, the front brakes are not working but the back is holding very very slightly. For example... If I bleed the back brakes for on my master cylinder with my brake pedal pressed in, the pedal goes down to the floor board but if I try bleeding the back brakes from the master cylinder, then it stays the same. Please help me. I'm sitting with this problem for almost a week and no mechanic is able to help me.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
