+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#2
Re: Temp gauge not working
ddgonzal
Posted on: 2015/6/3 3:18
Quote:
Temp gauge not working The cause could be: * Bad gauge * Bad sender * Bad wiring * Bad connection Test the sender. With ignition OFF, pull the wire off the sender. How many ohms are there between the BAT negative terminal and sender terminal? Good sender will read 20 ohms fully warm, 50 ohms lukewarm (50C/122F) and maybe close to 0? ohms cold. Compare the reading to the one you just replaced.  
#1
Temp gauge not working
uteboy1200
Posted on: 2015/6/3 2:30
My ute temp gauge is not working.
Fuel gauge is working. Have replaced the temp sender the other day and the gauge read halfway as soon as I turned ign. to reds. Discovered the hose clamp on thermostat was touching the sender wire giving me resistance and false reading. Fixed the short to the sender and now back to no reading on temp gauge. Any advice on what might be the problem here is appreciated
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
