User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



(1) 2 »


#13 Re: 1/4 mile
AFRacer Posted on: 2003/1/15 19:12
My best so far has been 16.5 @ ~86mph or so, that was Aug. 2002 in Texas so it was pretty warm out which didn't help at all. That's through the muffler on a stock rebuilt A15 short block (crank/rods/pistons), 2x40 Dellortoes, headers, mild cam (229 dur @ .050", .414" lift), lightened pushrods, and some head work. Also has B210 3.90 one tire fire rearend, so I was spinning through all of 1st gear.

Next time I go I should do better, I JUST finally beefed up the ignition (MSD-6AL, Accel 8.8mm 300+ race wires, 210 electronic distributor), got an exhaust cut-out welded on, and an O2 sensor and A/F meter hooked up, and the car runs WAY different. I did a street start from 5-80mph in 13 seconds yesterday! The A/F meter however revealed that I do need a bigger idle jet, but WOT mixture is perfect!

-Andy


#12 Re: 1/4 mile
cbr Posted on: 2003/1/15 9:06
11's is possible but the guys around here uses the engine we are not alowed to talk about, with turbo and nitro's


#11 Re: 1/4 mile
1200ute8u1 Posted on: 2003/1/15 1:38
i reckon12's are prety good for a not so moderfied 1200 maybe with a ca18 u might be gettin lower 12's but 11's are really good in my books


#10 Re: 1/4 mile
MadTimo Posted on: 2003/1/14 21:21
Quote:

cbr wrote:
The guy who taught me 'bout datto's ran a 12.7 with an A/15 on the 1/4 Mile at 198Km/h. That ute had turbo and nitrous on it with a modified lock diff.


Wow...thats pretty amazing out of an A15. Got any specs on the motor?


#9 Re: 1/4 mile
go_the_datto Posted on: 2003/1/14 9:46
My datto with a 1200 engine ran 15.2 with turbos thats with standard carby, points and a the rest of the drive line is stock, even down to the 3.9 single spinner diff


#8 Re: 1/4 mile
cbr Posted on: 2003/1/14 8:58
The guy who taught me 'bout datto's ran a 12.7 with an A/15 on the 1/4 Mile at 198Km/h. That ute had turbo and nitrous on it with a modified lock diff. Me I could only master a 15.1 with the turbo.


#7 Re: 1/4 mile
ddgonzal Posted on: 2003/1/14 7:30
The Lime green 2-dr sedan in the Photo Album did 13.9 in the 1/4. Not bad for a street-legal road car -- but then Texas cars are the fastest o' course.

Compare that to a stock 1200 Coupe: 1/4 mile: 19.6 secs @ 67 mph. Hang on!


#6 Re: 1/4 mile
MadTimo Posted on: 2003/1/14 5:44
Uh. My 1200 ute with A15 i dunno. Not real quick but.

Sorry I know your after 1200 times but my rotary 1600 did 12.0 @ 219 kph on a G-tech. Should be able to get a 10 on decent track and slicks. Will find out soon!


#5 Re: 1/4 mile
B120dat Posted on: 2003/1/14 5:19
My standard A12 with extractors might do the Quater in about 30 seconds

But as long as it looks good on the WAY With the tunes PUMPING


#4 Re: 1/4 mile
Alldat Posted on: 2003/1/14 4:55
Yeah i reakon i could crack the 20second mark



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]