Here's some more photos of the Water Box (ventilation air box). As you can see, the wiper pivots go through it (near the windscreen) and the bonnet hinges go though it

Attach file:

---

  water box - Heater air Inlet.jpg (47.94 KB)


  water box - interior firewall view_.jpg (189.58 KB)


  wiper pivots - interior view.jpg (173.14 KB)


  water box - exterior view.jpg (88.73 KB)


  20368.jpg (69.17 KB)

Definitely wasn't around the wiper pivots

Also not from the wiper motor

Only one side had one, however it does look a factory part

The way the notch in rubber is cut.
Also the angles and it was a perfect fit

It hasn't been done by hand, pretty confident it's a factory thing

It fills the gap between the lower water box panel and the underside of upper cowl panel

Im surprised no other Aussie cars have this, really does look to be a factory part

Think I'll have to check a few out

Cheers for all the drawings, help and pics

I'll let you know what I come up with

If that was around the wiper pivots, its the wrong part




If it was around the wiper motor arm, it doesn't look right to me. But if you have a sedan aussie-assembled maybe that's what Lucas used

Japan motor with arm

Hi All

Finally here are some pictures of what im trying to explain

Attach file:

---

  rubber-1.jpg (21.68 KB)


  rubber-2.jpg (21.89 KB)


  rubber-3.jpg (21.49 KB)

You can post a photo to a photo site, then post a link here

Or resize the JPG photo to 800x600 it'll Upload for sure

You can post a photo to a photo site, then post a link here

Or resize the photo to 800x600 it'll Upload for sure

Sorry for the delay in response

You could be right with not standard

Trying to attach a picture of what I have

I’ve tried 3 different iPhone photo resize apps so far

Hmmm ... maybe what he is describing is not stock?


These are the only factory ones that seal "around the hole where wiper pivot arm comes through the cowl"

Wiper Part Numbers
28876-H1000 SEAL-PIVOT WINDSHIELD WIPER (2 needed)

They are different than the "rubber boots" discussed above

Brojects sells them $10

Attach file:

---

  28876-H1000.jpg (117.21 KB)


  28876-H1000_.jpg (113.99 KB)


  28876-H1000-.jpg (117.07 KB)

Hmm. That particular picture
Looks like it may be missing the rubber part I'm trying to describe