+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#2
Re: Hone a 1200cc engine
ddgonzal
Posted on: 2019/10/4 21:34
For stock Pistons, it depends on how far honed it was in the first place
CLEARANCE, Piston to cylinder wall A12: 0.0009-0.0017" So time to measure the bore & the piston. If honing will make it more than 0.0017 inch clearance then oversize pistons are called for Oversize pistons were available in +.25mm, +.50mm, +.75mm, +1.0mm, +1.25mm, +1.5mm Better yet is a performance overbore using +3mm pistons (stock A14 piston). That changes the Cubic Centimeters from 1171 to 1270 cc. This gains more HP than upping the compression ratio. See A12 Overbore  
#1
Hone a 1200cc engine
windmilldave
Posted on: 2019/10/4 15:35
Hi..I have a datsun 1200cc B110 engine and need to hone out a little rust in the cylinder walls. How many .001 thousandths can I remove and still use original pistons? What size oversize pistons are available if I need to go that way?
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
