+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#6
Re: Thread and hose barb size
ddgonzal
Posted on: 2019/10/23 3:50
Neither, it is metric. You can measure the hole, then go to a hardware store or bolt store and get one the same size
The A12 is all metric except the early flywheel bolts and the oil sender threads as far as I know  
#5
Re: Thread and hose barb size
zigmondo
Posted on: 2019/10/23 0:05
Quote:
BSP or NTP
#3
Re: Thread and hose barb size
ddgonzal
Posted on: 2019/10/22 12:48
The front one is the temperature sender (or as Nissan calls it the "thermal transmitter"
M16 x 1.5 threads The original is a two-piece type with a threaded collar newer versions are a one-piece type with the threads cut into the transmitter Attach file:  24849a.jpg (41.37 KB) 25080-89900-1.jpg (43.61 KB) 25080-89900-1-1.jpg (40.96 KB) T1181.jpg (22.57 KB)
#2
Re: Thread and hose barb size
ddgonzal
Posted on: 2019/10/22 9:34
The one at the rear of the cylinder head is:
* 27070-H1000 CONNECTOR-WATER INLET OR, for no-heater (STD) models: * 00931-30610 PLUG-HEATER OUTLET HOLE For sale on eBay now As you can see they are taper threads. The hose barb is 17.5mm over 16mm O.D. tube (for 13 mm I.D. hose) ![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/photos/20668.jpg");) Attach file: 27070-H100.jpg (37.73 KB)
#1
Thread and hose barb size
Wilfred
Posted on: 2019/10/21 23:26
Hi Guys.
Could someone please tell me what both the thread and hose barb sizes are for the two fittings the bolt into the head at the two points indicated? I know the rear one is 90degrees while the front is straight but if someone could shed some light that would be great. Attach file: Untitled.jpg (49.25 KB)
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
