hi,
im was going to retrim my seats but pulled them out to find cracks and dodgy welds and repiars all over the frame work so im just after a pair of front seats.
i want something old skool and would prefer without headrests or with head rests that can be removed.
would also prefer something ripped and cheap so i can retrim them, but will also consider spending a little more on seats in original vynal trim in good condition.

im also after a set of hubcaps, will consider anything chrome, of a datto or mazda or similar.
and i need 2 original steel 12 inch datto wheels with the clips for hubcaps.
and will consider a set of 13 inch wheels from a 1600 aswell.
thanks,
John
johnaldduck@hotmail.com

where abouts are you
i have most of the stuff that you are looking for, but this will be no good if you are on the other side of the earth

What model car is this all for?
Do you want Datsun 1000 wheels [3-1/2"] with welded on hubcap clips, or 1200 wheels [4"] with pressed-in nubs for the hubcaps.

The 13 wheels from the 1600 [510], 180B [610] & the Stanza [A10] seem to be pretty much the same, so you might have more success with the later ones. Just make sure that if you use the 13" ones, that they are all from the same model as there may be some variation in rim width & offset.

Dodgeman, you make a good point too

thanks guys,
im in canberra.
basically, i want hubcaps and wheels. i have two 12inch wheels with clips. i dont mind if i get 13inch wheels with 1600 hubcaps or similar or 2 more 12 inch wheels and some 12 inch hubcaps, what ever is available.
let me know what you have and how much.
thanks,
John