+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Replacing Rear Axle Seals
Razor
Posted on: 2006/4/23 2:10
Do I need to replace and cut the old locking/bearing collar by cold chisel ?
or I dot have to? are the seals available at repco/auto parts store ? cheers  
#2
Re: Replacing Rear Axle Seals
ddgonzal
Posted on: 2006/4/23 2:17
Not to replace the seal. If I recall correctly you just pull the axle out, replace the seal and put it back in. You only need to cut the collar to replace the wheel bearing.
Since I didn't want to replace the bearings, I used to just pack low-temp wheel bearing grease in the old bearing and on the seal which quiets it down and stops the leak for another year ... The 1975-up axles have two seals; I've never worked on one of those.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
