i want to put a ca18 turbo in my 12oo ute does some one sell a step by step guide ?????????

I'm sure many of us could write up the easy stuff. But there is a fair bit of fabrication work required. That stuff needs templates or ready made parts that nobody sells. Most of us that did the conversion were more interested in getting it going, than taking detailed notes on every modification.

There is enough info on here that should see you through the conversion if you have patience and a mig welder.

i get your point i was just hopeing some won made like a list of parts that i have too buy . just so that when it happen my ute ant off the street s for too long . i have notice some internet site s sell cross members and gearbox tunnels and that stuff . in would be great too have all the gear ready

This is the exact same conversion I am currently doing, CA into 1200 ute. Depending on where you are is who you should speak to about your what to buy list. There is a bloke called Kev Rowley (located 30 minutes west of Brisbane) who is DA MAN IN THE KNOW about putting a CA into a 1200. He has given me a list of what I need right down to part numbers and he sells the necrssary crossmembers and all the other bits you can think of for the conversion. If you want to speak to him let me know and I will PM you his details. He is a very friendly bloke and has a wealth of Knowledge and info on datto conversions.

thanks dude im in perth . i have got a list of parts from maddat in sa if you want it ill send to you and it would be great if you send a list from you guy so i can compar
sorry about the late responce

hey i'm in perth and currently doing a ca into 1200 sedan project. I've got all the mounts made up, and have a fair idea of where i'm going with the rest of it. Just don't rush it, and make sure you do it properly the first time.

here's my collection of pics to date:
Datnet Project Cars - Darren's CA sedan
Its kind of at a standstill right now, as i'm back at uni.

who did the welding on the wheel arch and what did you use?

i did all the welding. Used a gassless mig. Uni-mig i think it is... i can't remember exactly what make it is