+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
B110 brake with s13 caliper n rotor problems.
teflon
Posted on: 2008/9/23 6:20
dear all, i have some problems with my brake, i need some advice from u guys. i had done the s13 caliper and disc conversion, but when i done my bleeding process, my brake still feel like no pressure, when i press the pedal, no pressure at all. i had done few times bleeding and still the same. i notice when i pump my brake pedal the brake fluid level in tank will decrease and after i release the pedal it will increase again. what really happen? is my mastercylinder faulty? i'm still using original master cylinder with servo from B310. please help. Thanks.
 
#2
Re: my B110 brake
frankthedolphintrainer
Posted on: 2008/9/23 6:52
i also had this problem with mine, i still dont know why it did it. i had to switch it back to the standard setup
#3
Re: my B110 brake
teflon
Posted on: 2008/9/23 7:21
Oooohh frank u swith to std setup? hhmm if i change my mastercylinder, will this prob appear? Quote:
#4
Re: my B110 brake
ROConnor
Posted on: 2008/9/23 8:02
Was it going down in Both resavuars? do you still hav drum's on the rear? you may just need to reset your rear drum's?
#5
Re: my B110 brake
teflon
Posted on: 2008/9/23 8:25
i'm not sure on rear tank, but in front tank in happen. my rear brake is still original drum. how to reset the rear brake?
#6
Re: my B110 brake
Quinn
Posted on: 2008/9/23 8:39
Just take it to a brake shop and get a pro to look at it, when it comes to stopping its best to pay up for a good job. But if you cant afford it, or something, it might be an internal seal in the master cylinder allowing fluid to bypass it. Oh and what condition are your flexible lines in? If they are old and ####ty they can bulge and therefore relieve fluid pressure causing bad feel.
#7
Re: my B110 brake
frankthedolphintrainer
Posted on: 2008/9/23 8:45
i even replaced the master cylinder and it didnt fix it. the only thing i can think o was the calipers that i fitted were stuffed, ive got another set of calipers to fit, just gotta get round to it
#8
Re: my B110 brake
teflon
Posted on: 2008/9/23 8:53
thanks quin, my flexible line are new one because s13 and my original were different. hhmm i can call a mechanic to solve it, but i will try DIY first... hehe since my conversion is DIY.Quote:
#9
Re: my B110 brake
teflon
Posted on: 2008/9/23 8:57
Quote:
i've service my caliper and it was ok... hhmmm i think i'll fit a new master and try.
#10
Re: my B110 brake
2332owner
Posted on: 2008/9/23 9:29
Are you sure the calipers are on the proper sides? The bleeder should be at the top. Seen many people overlook that.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
