hi guys im looking at making some fully adjustable struts for my race coupe, just after some photos and any info on how you made them, stanza, sunny, r31, s13 doesnt matter im interested in whatever.
cheers kurt

i've got adjustable ride height and camber in mine but i copped out and got datsport to make them for me. could probably get some pics tomorrow if you wanted.

yeah that would be sweet, how much did you pay for them?

i'm pretty sure it was $1000 for them to modify my struts.
ok the wheels will be off tomorrow.

We do these, and also make custom struts to your needs.


And these are Mad Dat Designed and manufactured billet camber tops.

280zx struts with ImportBitz.com weld on coil over kit, it was $225 from memory with c-spanners and springs were another $120.

Pauls fabrication in the US makes a very nice wilwood 4spot brake setup for the 280zx struts I will be buying one of these days.

keep the standard struts
chop out a section and reweld threaded top
weld on seat
fit shorter shocks
fit coilover sleeve/springs/hats
Refit to car with or without camber plates
Done

mine and unfams cars are running basically the say struts

stanza/200b struts, mine are cut down stanza ones with corrona inserts(very low ride height needed) unfams ones are 200b or stanza struts cut down to suit 240z inserts
both are using ebay spec alloy theads and perches with custom top perches on mine and tein top perches on unfams

the collars were a rather neat fit on the strut which was good, so i just welded a step onto the struts(bit of cut down pipe so the top is flat) for the thread to sit on and then used grub screws in the top of the thread to stop any rotation and movement upwards

so far they seem to be working all good and seem to be decent quality material....fr all of $100 to do both sets of struts neither of us are complaining

coz mik has a pic...i'll out do him , man my brakes look small

no complaints here, and ive adjusted the height heaps now trying to get it right and playing around with camber at lower ride height.. toe in toe out shake it all about.




i also have t3 s13 camber tops... and piggy has JIC ones (my old ones that are better than the new t3 ones )

i have 240k struts 270mm diameter rotors, cut down, with s13 tokico inserts (have 19mm shaft not 12mm) with fully adjustable solid tops, with 6kg hks springs