User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





#1 How do you check your charging Circuit ?
Sumith Posted on: 2010/1/12 6:03
Hi Guys

how do you check whether the alternator is charging you battery or not in a simple and easy way ?

thanks
Regards
sumith


#2 Re: How do you check your charging Circuit ?
WhiteSedan Posted on: 2010/1/12 6:17
Disconnect battery while engine is running, engine should continue to run on charge from alt.


#3 Re: How do you check your charging Circuit ?
Sumith Posted on: 2010/1/12 6:33
Hi Whitesedan

Thanks, no matter if it is positive end or negative end of the battery ?

Thanks
Regards
sumith


#4 Re: How do you check your charging Circuit ?
WhiteSedan Posted on: 2010/1/12 6:38
Positive sumith, thats where the batt gets it charge from, through that fusible link wire thats attached to the pos battery cable.


#5 Re: How do you check your charging Circuit ?
ddgonzal Posted on: 2010/1/12 7:18
Warning:
1. do not try this with newer cars. Those with electronic ignition or integrated-regulator alternator can sometimes be damaged. Like some late 70s Datsuns

2. do not leave the cable off for more than a second. The alternator output can go super high as it tries to regulate the voltage.


A more reliable test, easier too because you don't need to unbolt anything, is to use a voltmeter. At 1100 RPM, the battery terminals should read 13.5-15.0 volts. Too high is a problem you won't catch with the cable-off test, but you will with the voltmeter.


#6 Re: How do you check your charging Circuit ?
bailz Posted on: 2010/1/12 8:07
check battery voltage when off... start car then re-heck voltage,,, voltage will be higher when running


#7 Re: How do you check your charging Circuit ?
dattodude Posted on: 2010/1/12 11:19
continuing from bailz..

and when you rev the engine, the voltage should not rise.
If the regulator is broken, the voltage will go well above the expected (normal) 13.8v -> 14.4v


#8 Re: How do you check your charging Circuit ?
D4TM4N Posted on: 2010/1/13 10:04
DO NOT disconnect the positive whilst the engine is running, The battery releases Hydrogen Gas, which is highly explosive, disconnecting the battery with this present will ignite and boom, uve got a battery exploding in ur face.
Best way to check is with a multimeter.

a fully charged battery will hold 12.6v.
A fully functional charging system on an older vehicle is around 13.8 or higher






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]