I have a stock standard 1200 ute and I wish to put a brake booster in so the wife can drive it. I would like some advice on what
to use. Thanks

Do as I sort of have:

75-78ish Mitsubishi Lancer (RWD) Booster and Master Cylinder, also grab brake splitter unit below master cylinder. Use 120Y
front struts and brakes.

Easy as Pie.

Chris.

Does anyone know if it's possible to fit a hydraulic clutch to a 1200? Some of the hydraulic clutches I've seen in other cars have a huge tank which attaches to
the firewall...looks difficult to fit!

thanks,

justin

The U.S. 1200 came with a hydraulic clutch mounted on the left side of fire wall with a small resivior about half the size of
a brake mater cylinder

Bob

Justin I have one fitted to my coupe they are a real pain to get in and work properly.Mine is right next to brake Master cylinder I used a PBR Trailer master cylinder around $30-$40 had
to drill a 35mm hole inline with brake master clinder as close as possible and take clutch pedal out to make attachment for plunger rod. took a while but it works fine now. Let me know if
you want more detail I tthink I have some pics I can send .