I was sold this as a 5 speed gear box to bolt onto my A14...
Can anyone tell me what model gear box this is...What model dato/nisso did it come off?
I was sold it to bolt onto my A14
There is a grind between 2&3 so need to reco..
Where can I get parts etc..
Will this bolt onto A14, A15 ?

Attach file:

---

  IMG_0888.JPG (70.70 KB)


  IMG_0889.JPG (46.64 KB)


  IMG_0890.JPG (53.34 KB)


  IMG_0891.JPG (13.66 KB)

its a 60 seires - that will bolt up to an a14 or a15. you might need a different clutch cable- sometimes the end peice to the clutch lever is different on the gear box. you could also file it to fit.

is it a 4 or 5 speed?

its a nice strong box for a a 14 or a15

That is a 60 series 5 speed. A pic of the lower rear half will tell if it's a 60A or 60L and these only fit on A series. I would reccommend fitting the throwout bearing off the old gearbox on to avoid any issues there on fit up. As for the crunch, the synchro rings are still available but I would also reccommend replacing the energising srings and lugs. They can often cause problems shifting. I had one recently that had thrown a energising spring and did not need a synchro at all.

I've got the same trans to my A15. Very good upgrade.