Ok guys, its time for me to buy a house so the datsuns going to go for part of the deposit, really sucks but on the other hand I have really been #OOPS#ing around too much with it and hanging out with the nopics to much instead, maybe I am just too lazy atm.

Regretful sale (truthfully), the thing puts a smile on my face every time I see it, but house is way more important too me unfortunately.

All parts are open to offers but I probably wont take lowballs just yet as I have a fair few months before I will be putting deposits down on houses.

CA18DET 5speed gearbox $200
Working order and has most parts as far as i know.
CA18DET motor complete but in peices $650
Injectors, inlet manifold, sensors, head, block etc, has all parts but is in bits, the bottom end is assembled and bearings look ok down there, upon initial pulldown it had oil cheese from a head gasket leak, Can be slapped together for a runner but I personally would get the head cleaned up before running it. It has all the squirters etc and is a turbo block.
S15 SR20 injectors/fuel rail $200
Fully working off PSI999's s15, Same working condition I bought them off him as.
CA18DE cams $100
better exhaust cam duration then DET motor.
CA18DET stock loom from s13 $50
Standard ca18det loom with all the bits etc.

Pm sent about loom and ecu and Dibbs on members

Dibbs on xmember if not sold with car too plz

Want the kev Rowley loom

hi wanted to see if your intrested in selling the following all together,
ca18 cross member
struts
diff
rims
radiator
intercooler
turbo
mt10 computer
kev roly loom
turbo manifold
and the ca18det engine

I want to do a conversion on a 1200 ute if your intrested let me know 0418 266 883 if you have any other parts that could be of use for the conversion let us know too.

cheers joe

how low can you get on those struts and how good is the stopping power on the brakes??

3 sets of people interested in the struts, won't dip on price at the moment, never tested the brakes, I am pretty sure my master cylinder was too small for them but they locked the wheels fairly easily, my stock a12 with auto and 30hp wasnt enough to go testing it sorry. They are like 250mm vented slotted rotors.

Sent a pm to a few people who got in early in the messages, I'll see how the replies go before the weekend, don't be shy to show interest, alot of people are posers and don't come through on internet sales, so I'll be sorting the sales as quick as possible.

what a shame your not finishing it off. Love the colour and how much quality is in your project. This is a mine of good parts and its a shame i didn't see this a couple of months ago b4 xmas

Let us know about the Rowley loom ASAP mate.

Pm sent back bud thanks :)