hi folks need some help.
got to eliminate guard scrubbing on my tyres. just brought the ute and im getting rwc
done next week. tyre size is 165, 75 13inch. rims size is 13x7jj
any suggestions?
pretty sure they r 120y struts and brakes.
motor is l20b
cheers in advance.
other options i guess are new springs/shocks or new rims?

having trouble uploading pics.

gaurds are rolled too

different rims.

It's the rims. 165/75R13 tires do not normally rub. Do they rub on the gaurds or on the chassis? Scrubbing means rubbing on the pavement.

The normal size rim for 165s are max 6" rim (per tire manufacturer). You might make the 7"-wide rims work with spacers to achieve +30 offset.

will 15inch trx rims fit?? i can get a cheap set of those locally

gaurds are hitting them

> gaurds are hitting [the tyres]

Then change the rims unless you want to modify the bodywork.

Tyres on TRX rims rub too.

Where are they hitting at the top or at the front of the guards? Tyre profile helps,too 165 65 13 will help 75 is way too tall. They will be ok on rears.

I had 175/70/13 on a 5.5"rim on my ute that i sold and they were fine.

It will be his rim offset, 5'5 inch to 7 is a big difference depending on offset especially.

May have to trim the front of the guards if that's where it's hitting.