+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Can i mod either 1200 knuckles or 280zx knuckles to suit my 280zx struts into 1200
darrell32
Posted on: 2013/2/25 13:38
Ok i have a late model 1200 ute, i have been searching for stanza steering arms to suit my 280zx strut conversion but i cant find any, my question is... i have the 280zx steering arms, and obviously the utes got its original late model steering arms, Can i modify either of these to work, and whats involved?
 
#2
Re: Can i mod either 1200 knuckles or 280zx knuckles to suit my 280zx struts into 1200
ddgonzal
Posted on: 2013/2/25 22:25
Yes, you can modify the late Ute steering arms. Needs a bit of maching.
Ute arms (H74) are faster ratio than Stanza/Sunny (W50) arms. See Knuckle Arm for photos and measurements. Basically widen the bolt holes from 75mm to 80mm and machine it for the strut hole. ![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/thumbs/23761.jpg");)
#3
Re: Can i mod either 1200 knuckles or 280zx knuckles to suit my 280zx struts into 1200
darrell32
Posted on: 2013/2/27 13:22
i get slotting the outside bolt holes to 80mm spacing, but what needs to be done to the inside taper hole for the w50 ball joint? just so i can instruct the machine shop on what to do.
#4
Re: Can i mod either 1200 knuckles or 280zx knuckles to suit my 280zx struts into 1200
ddgonzal
Posted on: 2013/2/27 18:40
Unknown. Is there any difference? Give the new ball joint to the shop so they can machine it to suit.
Pitroad sells these already modified.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
