+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
handbrake tips for r31 diff in 1200 ute
Murvz
Posted on: 2015/1/29 0:08
Hi,
Ive recently installed my shortened r31 diff with standard r31 calipers into my 1200 ute. The only thing I have left to do is somehow configure a working handbrake so I can pass rego. Was wondering what setups people have used in the past? I have all the original handbrake gear from the skyline that a pulled the diff from. Not too keen on the maddat setup with the reversed rear calipers either. Cheers!  
#2
Re: handbrake tips for r31 diff in 1200 ute
ddgonzal
Posted on: 2015/1/29 5:25
There is some information at BW78 Rear Axle Swap
![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/photos/10820.jpg");) Coops pocketed the R31 pulley thing, cut the bracket off & drilled to suit the 1200 adjustment bracket.
#3
Re: handbrake tips for r31 diff in 1200 ute
Murvz
Posted on: 2015/1/29 8:52
Not a bad little set up! Ive got something similar in my head. But I'll have to mount it in a different position due to my brake line splitter being installed there. Do you know if he had to get aftermarket hand brake cables made?
#4
Re: handbrake tips for r31 diff in 1200 ute
ddgonzal
Posted on: 2015/1/29 8:58
Yes, he did a detailed write-up. See BW78 Rear Axle Swap and click the links to discussion and click the photos.
#5
Re: handbrake tips for r31 diff in 1200 ute
Murvz
Posted on: 2015/1/30 8:25
Cheers for that. It's been a good read
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
