Hi Guys ,

What sort of money would a GX HEAD and h95 inlet manifold be worth , unmodified , good condition ..

Cheers

Heads depending on condition 650-1000 is not uncommon

however if you are after performance the japanese
use the old round port heads weld up the chamber
as they are smaller and easier to achieve a modern
race chamber also they fill up the ports and re-port
them higher up for a straighter flow all topped off
with 40mm in/ 33mm ex valves which are not the
biggest but do what they have to do.

I've seen them as low as $250 for bare heads and upwards of $1200 for big valve ported heads.

A stock one in reasonable shape is likely to bring $400-$500. The tough bit is that those of us who use them (racers) have a spare or two by now so the demand isn't what it used to be. That's not to say they aren't in demand.

I bought a bare head from yahoo auctions but went through import monster so have fees added to the sale price.

Owes me $436 landed, but im now waiting 6 weeks shipping because im a cheapskate and went cheapest postage.

I feel like i got a good deal.
The only one i can see for sale here is $1150 on gumtree.

So prices vary, but i think average is approx 800-1200 in complete working order.

many are machined to buggery for speedway 14.1 so be careful guys

This is what i was happy to pay 436 for.

4th chamber has had a valve bounce around?

Not sure whats what.

Once it arrives ill see some shops and get quotes.

Arundle cylinder heads repaired my GX head which was in bad shape Troy is very good at what he does and he knows A series very well
He has my new motor to do all the machining.

Will have to check them out.

Thanks for the tip.