1989-up A12 manifold
* Round-port
* wet style intake,
* new bolt-pattern
* extended-length carb flange with water passage

Attach file:

---

  14001-95W00 MANIFOLD-INTAKE.jpg (56.73 KB)


  Hitachi DFC carburetor flange.jpg (36.86 KB)


  bottom view -- water inlet at left.jpg (46.26 KB)


  cylinder head flange with water port.jpg (78.09 KB)


  round port.jpg (76.26 KB)


  vacuum port for brake booster + small plug.jpg (39.00 KB)

more photos
* with air cleaner bracket (side-bolt bracket)
* hose for PCV valve (in same place as 1970 manifold)
* Vacuum Connector forward hose goes to Vacuum Switch bolted to left strut tower

Attach file:

---

  14001-95W00-1.jpg (49.58 KB)


  14001-95W00-2.jpg (40.03 KB)


  14001-95W00-3.jpg (42.23 KB)


  14001-95W00-4.jpg (39.47 KB)


  14001-95W00-5 [vacuum switch].jpg (37.45 KB)

Factory heat shield

and complete package
* variable-mixture carburetor
* air-temp controlled aire cleaner & brackets
* cold air intake duct
* hot air tube
* fuel rail with return line

Attach file:

---

  CARB INSULATOR 16164-19B00 with14330-G5102 GASKET.jpg (137.76 KB)


  487478248_1.jpg (46.40 KB)


  487478248_2.jpg (36.21 KB)


  487478248_3.jpg (46.50 KB)


  487478248_4.jpg (40.85 KB)


  487478248_5.jpg (47.78 KB)

wonder what the Vacuum Switch is for

Nissan 22360-01M00 / Hitachi SPDB28-115

used by Y10, N12/N13, B11/B12, W11 for "swirl control" but the 1200 doesn't have that

Attach file:

---

  C14-02 B120A-C1402-0282.png (37.62 KB)


  B120_CONNECTOR.png (12.87 KB)


  26297.jpg (65.19 KB)


  Vacuum Switch _.jpg (98.50 KB)


  SPDB28.jpg (33.19 KB)