Hi

Does anyone know which strut inserts i can run in my 45mm 120y front struts. Im looking at making coil overs using this kit.

https://www.performancesuspension.com. ... for-making-a-strut-into-a


And i need shorter inserts. I have read the wiki where n10 pulsar and vw golf insert are used but im having trouble sourcing them from parts shops and online.

Also the part number on the wiki dosnt seem to yield much results. Anyone have any new part number?

Thanks

I think the N10 struts ran out a few years ago.
supafatto is the one you need to chat to as to whats available today
dp

Thanks i have sent a pm to supafatto.

Thanks i have sent a pm to supafatto.

From memory I think I used rear MR2 strut inserts . About 30mm lower and can get them as a Koni adjustable shock.

Which year/ model mr2?

Did it fit in thr housing ok?

My memory is old and foggy but we used

Koni adjustable shocks 8641 1072sport
we cut 30mm out of strut leg and put the King lowered springs on them .
Top it off with camber adjusters and S13 brakes and we have a great front suspension at a reasonable price .

I think i have found a part number for vw golf strut inserts for kyb.

From what i can gather the part number used to be kyb 361005 but i called up a auto parts place an that part number dosnt exist.

So i got him to look up a 1975 golf with the 1.6l engine and the part number that came up was kyb 363001

Can anyone confirm if that is the same part just new part number?

It seems available through auto part shops.

Hi

So i called up kyb head office and confirmed the part numbers

Part number: 361005 is a american part number

Part number: 363001 is for australia.

They both share same specs with the outer diameters being 38.1mm so it should fit inside a 45mm strut.

I will update the wiki with the part number to make it easier for people in the future.

363001 done fit the shock tube FYI