+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Lost my bearings !!
R-fastmotorsport
Posted on: 2004/4/26 11:36
Another qeustion in the diff area ...
While trying to replace rear wheel bearings on the coupe ( for the disc brake upgrade) I was asked if it is Jap or borg Worner. Jap, I say because Borg Warner would be ex 120Y and / or would have a removable backing plate. The bearings supplied are the same as ser 1 B/B or vanette (about 18mm wide) where the coupe h145 axles have 16mm wide bearings. The recess in the housing matches the 16mm width so I am wondering if it is a huge issue ?? I am assuming that maybe the bearing retainer plate bulge will accept the difference ??? Could I just have the OEM bearings and all replacements are the same ? Again I beg for your assistance ! Thanks heaps.   
#2
Re: Lost my bearings !!
dattodevil
Posted on: 2004/4/26 11:38
If 16mm came out, then 16mm should go back in
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
